3-Button pendent control with emergency button

The ladder hoist is controlled by a low voltage pendant control with 3 push buttons and 6m to 12m of cable. The pendent control is fitted with a quick looking multipin connector.In case the pendant control is damage, it is not necessary to dismantle the hoist; it is sufficient to send the control for repair and continue to work by simply plugging in the additional pendant control.

The ladder hoist is the perfect machine for lifting many kinds of material on small job sites. The lift can be erected at varying heights to lift bulky and heavy weights, but only taking a small space.

OVERLOADED PROTECTION

All the motor gearboxes are equipped with thermal magnetic overload protection and no volt protection. The thermal magnetic overload protects the motor in conditions of overload and the no volt coil prevents any restarting of the hoist in the event of power failure.

EXTREME VERSATILITY

The wide range of accessories available makes for the safe carrying of many kinds of materials. The accessories range from a bucket for liquids to platforms for solids, such as bricks and tiles.

HIGH PERFORMANCE: 25M IN 30 SECONDS

The lift is supplied with either a single or dual speed electric motor. The PASO 1502V, powered by dual speed motor, allows to perform quick work cycles. After starting at 18m/min, an automatic timer doubles the lifting speed up to 36 m/min. In this way some 15 seconds are necessary to transport the load up to 20m length.

The universal carriage is provided with a fast coupling device which makes for the quick installation of the various accessories. The carriage is fitted with an emergency brake which locks the carriage to the ladder section in the event of a wire rope breaking